This machine is in beta mode, and purchasing this product acknowledges that it will likely have flaws.  It is a raw, loosely refined machine and will not be winning any beauty contests.

Purchasers agree that they are intending the product for personal use and will not try to duplicate.  Purchasers also agree that with the beta-version nature of this machine, they will provide feedback on how to improve the machines. Although this feedback is incredibly welcomed and expected, we cannot guarantee that every suggestion will be implemented.

Machines are built to order.  This means that parts are not ordered until an order is placed.  Lead times are unknown, and they cannot be guaranteed.  Most of the electronic parts come from Amazon which makes them subject to their part availability; however, the plus side is that the parts list you receive will have descriptions available should you ever need to order a replacement part which then makes it easily obtainable from Amazon.  The target is to hit a 4-week lead time; again, this is both unknown and not guaranteed.

Machines will not be guaranteed to operate forever due to the nature of their parts.  If parts break, it is up to the purchaser to replace the parts.  However, the machines are pre-assembled and tested before shipping.  Should you ever have any issues, we will absolutely be willing to help you diagnose your machine and get you back up and running.

Machines will be filled with cooling water for testing but then drained for shipping.  It is up to the purchaser to refill this cooling water upon receiving the machine.  We recommend distilled, reverse osmosis, or any other kind of water that will be unlikely to have buildup restrictions for the water flow.

If you have any questions before or after purchasing, please email reese@thebulletpros.com

The post Dillon-Mounted Induction Annealing Machine appeared first on BulletPros.

Designed to hold in ejectors to alleviate the spring pressure while you remove the ejector pin.  When hit with a punch the ejector pin will fall into the cup underneath instead of rolling around on the floor.  For reassembly, the screw holds the pin and spring back far enough for you to get the pin in without needing a 3rd hand.

If you need to work on extractors, you can do that, too.  The AR base has its own slot for the extractor pin.  On bolt action bases, (and depending on the design of your bolt), you can move the bolt forward and pivot it so that the extractor pin is vertical.  Then tighten the screw to hold the bolt while you work!

Buy more than 1 to unlock a 15% discount!

Four screw sizes are available to accommodate different sizes of bolt faces.  They are 223, Grendel, 308, and Magnum.  All screws are interchangeable across all bases.

NEW:  Remington 700 Firing Pin Tool Insert!  This insert fits the Remington 700 (0.700″) base and will compress the spring so that you can remove the pin to completely remove the firing pin.  Add this on to your order!

The Tikka T3x bolt was tested to fit a Remington 700 (0.700″) base.  The lug height is a little smaller so it rotates until the lug contacts; this should be fine, but just remember to remove your firing pin before removing the roll pin!

Please note:  the 3-Lug base is designed around the Curtis Valor bolt which has a 0.750″ bolt body diameter.  The Howa was designed off of a smaller-body Howa bolt; other Howas with a larger bolt do not fit this and may instead fit the Remington 700 (0.700″) base.  If you aren’t sure whether your action will work, please contact reese@thebulletpros.com.

If there is a design you wish to have that you do not see, please contact reese@thebulletpros.com to inquire about having it made.

Coming soon:  Winchester Model 70

If you forget the color code of the screws, you can reference it here:

• Blue – 223
• Black – Grendel
• Red – 308
• White – Magnum

The post Bolt Tool appeared first on BulletPros.

The post Muzzle Threading appeared first on BulletPros.

The post Freedom Seeds, Bulk appeared first on BulletPros.

Utilizing a Remage 1:3 twist barrel chambered in 8.6 Blackout, the barrel is cut and threaded to fit a Sig Sauer Cross.

Price includes the barrel.

Orders are made to order.  Estimated lead time 2-3 weeks after receipt of materials.

The post Sig Sauer Cross 8.6 BO Conversion appeared first on BulletPros.

Worried about needing to reload for precision?  Worry no more.  This is the perfect blend of precision components and loading processes offered at prices that you can still afford to shoot.

Powder charges are individually weighed to within +/- 0.02 grain (about 1 kernel) to give you the most consistent velocities possible.

High quality tooling ensures minimal runout for impeccable bore alignment and small groups!

Bullets in each cartridge:

6mm Creedmoor – 107gr Sierra MatchKing

6.5mm Creedmoor – 142gr Sierra MatchKing

308 Winchester – 175gr Sierra MatchKing

The post BulletPros Holy Grail Ammo appeared first on BulletPros.