Gunsmithing Services
Bolt Actions
-
“The Works” $1595
The ultimate precision package. Blueprint action, Pinned recoil lug, Sleeve bolt (metal), Bush firing pin, Tune Ignition, Chamber & Thread barrel, Bed Action. (Barrel Blank not included).
-
Lap Lugs $75
Lap bolt and receiver lugs to increase lug contact and improve bore alignment when firing.
-
“Blueprint” Action $295
True receiver face, threads, and lugs. True bolt face, nose, and lugs.
-
Metal Bolt Sleeve $295
Custom metal bolt sleeve to increase bore alignment and decrease shot-to-shot variation.
-
Epoxy Bolt Sleeve $195
Custom epoxy bolt sleeve to increase bore alignment and decrease shot-to-shot variation.
-
Pin Recoil Lug $125
Drill and pin recoil lug for consistent recoil lug positioning
-
Fix Bolt Extraction $195
Increase primary extraction (performed by bolt opening) when low extraction is causing stuck cases or risks it happening
-
Bush Firing Pin $195
Install custom bushing for firing pin guide. Enables small diameter firing pin conversion. Installation of new firing pin included (purchased separately).
-
Tune Ignition Energy $195
Fixes low energy in ignition system that often results in low primer penetration.
-
Polish Cocking Ramp $75
Polishing cocking ramp for smooth operation of bolt.
Barrels
-
Chamber & Thread Combo $450
Precision chambering and muzzle threading combination deal.
-
Chamber $375
Precision chambering barrel to your desired cartridge.
-
Thread Muzzle $175
Threading muzzle to your desired thread pitch and diameter to fit your muzzle device.
-
Barrel Lapping $150
Lapping barrel to remove defects such as diameter changes to improve barrel performance.
-
Barrel Installation (Shouldered) $75
Installation of a shouldered barrel.
-
Barrel Installation (Non-shouldered) $125
Installation of non-shouldered barrel
-
Brake/Suppressor Install (Self-timing or timed) $25
Installation of brake or suppressor that is either self-timing or has already been timed. Includes clearance check if necessary.
-
Brake/Suppressor Install with Timing $150
Timing muzzle threads to match brake or suppressor. Includes clearance check if necessary.
-
Throat Longer $195
Increase throat length of chambered barrel.
-
Cut, Crown, Thread, and Weld $225
Cutting barrel length to shorter length with a new muzzle crown, then rethreading and pin & weld muzzle device to meet minimum barrel length requirements.
Scope, Sights, and Supports
-
Bed Scope Rail $95
Epoxy bedding scope rail for stress-free mounting.
-
Bed Scope Rings $95
Epoxy bedding scope rings to ensure maximum contact and remove stress. May also fix poor scope alignment.
-
Lap Scope Rings $75
Lapping scope rings to ensure scope ring alignment and maximize contact area.
-
Mount Scope $75
Mount scope on firearm. Perform bore-sight.
Stock & Chassis
-
Bedding Action $295
Custom epoxy bedding stock or chassis to maximize contact area and minimize stress on the action.
-
Pillar Bedding Action $345
Custom epoxy bedding stock or chassis and installing custom metal pillars to maximize contact area and minimize stress on the action while adding additional support.
-
Balance Chassis $95
Positioning weights on chassis for optimal balance during positional shooting. Does not include materials.
-
Add Clearance $75
Modifying stock or chassis to improve or correct barrel clearance
-
Float Barrel $150
Modifying stock to float barrel.
Other
-
Tig Weld Bolt TBD
-
Silver Solder Bolt Handle TBD
-
Rifle Evaluation $75
Not sure where to start on your precision journey? Get a full rifle evaluation to see where your rifle actually needs work and where it may not. Plus, if you choose to do the work with BulletPros afterwards, we’ll credit the evaluation cost towards your purchase.
-
Custom FL Sizing Die $695
Get a full length sizing die that matches your chamber and has improved alignment over most factory dies. Can custom-tailor to your desired fit.
-
Custom Seating Die $475
Get a custom seating die to match your chamber. Dies are arbor-press style blanks from L.E. Wilson and custom cut to match your rifle.